기타정보

Repairs to uPVC Windows

Upvc Window Repair is an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they are not susceptible to rust or rot.

It is important to clean and oil UPVC windows and doors regularly. This will save you from unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows could cause serious damage to your home and may even be fatal. It is important to ensure that your windows are in good condition.

Single-pane windows are relatively simple to replace and typically fit into frames of the past easily. If windows with double panes are held together by internal beading, it is more difficult to remove and replace the old panes. In this case, it is necessary to buy plastic spacers to aid in fitting the new pane into the window frame.

Wearing protective eyewear and uPVC window repair thick gloves is a must when you are planning to remove the glass yourself. It is also a good idea to lay down a drop cloth prior to when you start working on the glass, so that any fragments of glass fall onto the cloth instead of onto the floor where they can be trodden under and cause further damage.

It's a good idea to tape the gap once the glass has been removed. This will stop drafts and water from getting into your home until a professional comes out to fix the window. This also serves as a barrier to prevent any intruders from making their way into your home. If the gap is large, you might be interested in the security door with an integrated window, since it offers the best of both worlds.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash windows. As time passes, they may develop a number of problems that include sagging. A window that isn't properly aligned can cause problems with light, draughts or even security. It is crucial to act when you realize that your uPVC windows are sliding.

Repositioning the hinges can help fix a window that is sliding. To do this, you'll need open the window to access the frame. After that, using an screwdriver, remove the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. After you've repositioned the hinges, shut your window and test it for fitting. If you're happy with the fit, you can tighten the screws to ensure they stay in the right place.

If you are unable to reposition the hinges, you might require replacing the seal. Seals made of rubber can dry out and lose their elasticity with time, causing them to lose their tightness. If this happens, it's crucial to replace the seal as quickly as possible to ensure your uPVC windows remain watertight and safe from drafts.

uPVC handles could also become loose. This is often caused by screws that have loosened over time, but it can also be due to the handle mechanism wears out. Fortunately, it's easy to repair a loose uPVC window handle yourself. First, you'll need to close the window and then perform an experiment fit. The corner joints of the sash should align with the casing joint. If it doesn't then you can use the screwdriver to loosen the handle. Then turn the mechanism to position.

3. Water Leaks

It is essential to take action if you get up each morning to find mouldy walls and floors that are wet. The leaks of water from windows do not only lead to the degrading of the structure of your home but also hamper your efforts to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a fairly simple fix and should be undertaken by any competent DIYer. Depending on how serious the issue is, old caulking might need to be removed. It is essential to remember that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk in order to make the area more difficult to clean and reduce the efficiency of your energy.

Check that any drainage holes are free of debris in them, and also ensure that the sill pan has been angled correctly to drain away from the window. In more extreme cases, you may need to replace the window.

Moldy sills and rotten ones are other signs of water leakage. This mold thrives in damp environments and is able to quickly spread throughout the house.

It is also important to remember that if the leakage originates from the glass of your double-glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sagging. Again this can easily be fixed by an uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and open with ease It could be the hinges that are at fault. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Almost every household in the UK will have top-hung or side-hung upvc window repairs near me windows that have hinges and, like all mechanical parts, they will wear out over time. It's easy to replace a hinge on a window, but it's easier if someone else helps you to hold the frame.

Make sure that the uPVC hinges open and close in the right direction. You can check this by looking for the arrow on each hinge, this indicates which way the window should be opened.

Window hinges that aren't working properly could be the result of incorrectly opening the window a certain manner or because of poor installation at the factory. This can often be resolved by sending us a photo through our website and we will be pleased to offer you suggestions.

Regular lubrication of the hinges is essential. This can be accomplished by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication will help the window open and close more easily. It can also prevent corrosion and decrease the chance of sticking. This must be done at a minimum every year. WD40 and other solvent-based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different causes. The hinges may also become misaligned due to wear, causing gaps where the sash meets frame. If they're beyond repair, it might be required to realign them. The second is the interlock, which is located on the hinge of the window and can also be misaligned, and again it may be possible to give them a good clean, but in certain cases, it may be necessary to have them replaced.

These seals are susceptible to wear and tear or be damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass, this will help in regulating indoor temperatures, and also lessen the risk of draughts.

One of the most effective methods to reduce the draughts in your home is to use a draught excluder, these are typically fabric tubes that are filled with some kind of filler. They can be placed on the windowsill on top. These will keep your home warm by blocking cold air.

With a little regular maintenance and repair windows made of upvc will provide a great level of security and insulation for your home. It is crucial to realize that all windows have a lifespan and they may reach the point when it's more economical to replace them than repair them. If you encounter any issues with your upvc window, it's best to consult an expert as soon as possible.